Connecting the Radio to the Laptop To set up the Baofeng UV-S9 Plus, operators have to connect the transceiver to a computer utilizing a setup cord. The configuration cable is typically included with the device or can be purchased independently. This is how to link the transceiver to the PC:
Connecting the Device to the Computer To program the Baofeng UV-S9 Plus, individuals need to attach the radio to a machine employing a configuration cord. The configuration cable is typically included with the transceiver or can be acquired separately. Here's how to link the transceiver to the laptop: baofeng uv-s9 plus programming software
Attach the configuration wire to the device's configuration port. Connect the remaining part of the cable to the laptop's USB socket. Turn on the transceiver and configure it to the “Programming” mode. Connecting the Radio to the Laptop To set
Connecting the Transceiver to the Computer To configure the Baofeng UV-S9 Plus, operators require to link the device to a PC employing a setup cable. The setup cord is usually supplied with the radio or can be acquired independently. Here’s how to link the transceiver to the laptop: The configuration cable is typically included with the
Frequency Control
Connect the setup wire to the transceiver’s configuring jack. Connect the other end of the cable to the PC’s USB socket. Switch on the device and configure it to the “Programming” mode.
Link the configuration cord to the radio’s programming jack. Link the remaining end of the cable to the machine's USB interface. Power on the device and set it to the “Programming” mode.