Software Prerequisites To control the 3040 CNC machine via USB, you will want to install the following software:
3040 CNC machine USB cable Computer with a USB port (Windows or Mac) CNC control software (e.g., Mach3, Mach4, or LinuxCNC) Driver software for the CNC machine’s controller (e.g., Smoothieware or GRBL) 3040 cnc usb setup
Regarding Mach3: Open Mach3 and pick “Config” > “Ports & Pins” from the menu. In the “Ports & Pins” pane, select the “USB” tab. Select the right USB port from the selection menu. Press “OK” to store the settings. Software Prerequisites To control the 3040 CNC machine