Jdy-40 Arduino Example !link! Online

Software Requirements You’ll also need to install the following software:

Arduino IDE version 1.8 or later)

# include # SoftwareSerial bluetooth(2, 3); # void setup() # Serial.begin(9600); bluetooth.begin(9600); # void loop() # if (bluetooth.available() > 0) # char c = bluetooth.read() Serial.print(c); # if (Serial.available() > 0) # char c = Serial.read() bluetooth.print(c); # # # This code sets up a simple serial communication between the Arduino and the JDY-40. You can upload this code to your Arduino board using the Arduino IDE. # Step 4: Test the JDY-40 # To test the JDY-40, follow these steps: # Open the Serial Monitor in the Arduino IDE # Set the baud rate to 9600 # Type a message in the Serial Monitor and press Send # The message should be transmitted to the JDY-40 and received by the Arduino # Example Projects # Here are a few example projects you can build using the JDY-40 and Arduino: # Wireless Controller: Use the JDY-40 to create a wireless controller for your Arduino projects. # Bluetooth Robot: Use the JDY-40 to control a robot using a Bluetooth-enabled device. # IoT Weather Station: Use the JDY-40 to transmit weather data from an Arduino weather station to a Bluetooth-enabled device. # Conclusion # jdy-40 arduino example