K-tek Level Transmitter At200 Manual |verified| Jun 2026

The K-Tek Level Transmitter AT200 utilizes a non-invasive, non-contact measurement approach to determine the level of a process fluid. The instrument sends a high-frequency signal that travels through the vapor space and reflects off the process fluid surface. The reflected signal is then received by the transmitter, which calculates the level based on the time-of-flight (TOF) principle. Installation Procedures Proper installation of the K-Tek Level Transmitter AT200 is vital for best performance and accuracy. The following steps should be followed: Mounting: The transmitter should be installed in a location that offers easy access for maintenance and calibration. It's recommended to place the unit in a vertical alignment, with the sensor facing downwards. Process Connection: The AT200 can be attached to various process connections, including flanges, threads, and sanitary connections. Confirm that the process connection is suitable with the device's wetted materials. Electrical Connections: The transmitter demands a two-wire, loop-powered connection. Join the unit to a 24V DC power supply and ensure that the loop resistance is within the recommended limit.

K-Tek main site AT200 customer guidebook Expert support documentation k-tek level transmitter at200 manual

Operating Principles

Routine Checks: Perform regular checks on the instrument’s electrical links, process junctions, and sensor for indications of wear or The K-Tek Level Transmitter AT200 utilizes a non-invasive,