Lug Nut 4x4 Disc Brake Conversion Installation Instructions

Lug nut 4x4 disc brake conversion set (specific to your vehicle make and model) Brake rotors (2) Brake calipers (2) Lug nuts

Bolt the brake caliper: Attach the brake caliper to the rotor using the included fasteners. Ensure certain it’s correctly positioned and securely torqued. Hook up the brake lines: Run the brake hoses to the brake clamp. Using a wrench to secure the fittings. lug nut 4x4 disc brake conversion installation instructions

Disconnect the hydraulic lines: Use the wrench to loosen the brake connections fittings then remove the hydraulic hoses out of the stopping assembly. Remove the brake: Use a tire iron to loosen the brake drum then remove it from the wheel assembly. Take out the brake shoes plus hardware: Take out the old stopping linings, springs, and hardware. Place them to one side and prepare for removal. Lug nut 4x4 disc brake conversion set (specific

Tools and Supplies Needed Before starting the installation make certain you possess the following tools and materials: Using a wrench to secure the fittings

Phase 1: Ready Your Vehicle

Lift up your car: Lift the vehicle with the hydraulic jack and brace the using mechanical stands. Ensure certain the car is firmly supported and on the flat ground. Take off your rims: Remove away the rims to access the brake assembly. Set the wheels to the side then get the brake parts for removal.

Fit the lug nuts: Thread the lug nuts onto the wheel studs. Make certain they’re evenly fastened in a cross pattern. Place the wheel: Set the wheel back onto the hub and hand secure the lug nuts.